Frame Specs
| Design Wheel/ Tire Size | 29 x 2.4" |
| Alternative Wheel/ Tire Size | 27.5 x 3.0", 29 x 2.4" w/ fender (29 x 3.0" only compatible on SM–XL frame sizes) |
| Suspension Fork Length (Travel) | 501–511mm (100mm) |
| Rigid Fork Length | 483–486mm |
| Fork Offset | 45–51mm |
| Headset-Upper | ZS44 |
| Headset-Lower | EC44 |
| Seatpost | 27.2mm |
| Seat Collar | Steel: 30mm Ti: 32mm |
| Front Derailleur Mount | 148mm rear spaced: high direct mount (29mm offset) Problem Solvers Bracket (FS1328) 142mm rear spaced: high direct mount (26.5mm offset) via 28.6mm clamp Problem Solvers Bracket (FS1326) |
| Bottom Bracket | 73mm BSA, threaded |
| Crankset (Max Ring) | 1x crankset: 36t max Boost & 34t non-Boostor 46t Gates Belt Drive Sprocket, 2x crankset:42/28t max Boost & Non-Boost |
| Rear Brake, (Rotor) | 51mm I.S. (160–180mm) |
| Rear Spacing | 148 or 142mm thru-axle 135mm QR w/ Alternator reduction plates |
| Rear Axle Size | 148mm rear spaced: 12 x 180L, TP = 1.75, TL = 20 142mm rear spaced: 12 x 174L, TP = 1.75, TL = 20 135mm rear spaced: quick release 142 & 135mm spacing require the use of Salsa Alternator Reduction plates (FS2360} |
| Derailleur Hanger | QR = FS1312; TA = FS1374; SS = FS1318; SSTA = FS1375; L Rohloff = FS1371; TA Kit = FS1370 |
| Fender Mounts | Yes |
| Rack Mounts | Yes |
| Bottle Mounts | XS = 2, SM–XL = 3 |
| Stem Clamp | 28.6mm |
| Crown Race | 40mm |
| Front Brake (Rotor) | 74mm post mount (160–180mm) |
| Front Spacing | 110 x 15mm thru-axle |
| Front Axle | ø15 x 135, TP=1.5, TL=12 |
| Bottle Mounts | 4 (3-Pack config |
Геометрия рамы Salsa Fargo Steel 29"/27.5"+
- Тип тормоза Дисковый
- Тип Рамы
- Направление Туринг
- Комплектация Рама+вилка
- Материал Хром молибден
- Возможность установки ремня Да
- Дропауты Альтернаторы SALSA A12
- Тип рамы Хардтейл
- Размер колес 29"/27,5"+
- Модельный год 2018
