Frame Specs
| Max Tire OD | 700c: 716mm; 650b: 696mm |
| Design Wheel/Tire Size | 622 - 32 (700 x 32mm) |
| Alternate Wheel/Tire Size | 622 – 32-45 (700c x 32mm – 45mm/1.2” – 1.8”) 584 – 47-51 (650b x 47mm – 51mm/1.85” – 2.0”) |
| Suspension Fork Length (Travel) | 427mm axle-to-crown (40mm travel) |
| Rigid Fork Length | 405mm |
| Fork Offset | 50mm |
| Headset-Upper | IS41 |
| Headset-Lower | IS52 |
| Seatpost | 27.2mm |
| Seat Collar | 32.0mm |
| Bottom Bracket | BB86 PressFit |
| Crankset | 1x: 44t max; 2x: 52/36t max, 46/30t minimum |
| Rear Brake (Rotor) | Flat Mount 140, 140-160mm, Flat Mount Frame Standard 20mm Thickness, 27mm Bolt Length |
| Rear Spacing | 142mm |
| Rear Axle | M12 x 167L, TP = 1.5, TL = 20mm |
| Derailleur Hanger | Hanger 465, QBP# FS2322 |
| Fender Mounts | Yes, required fender hardware included |
| Rack Mounts | Yes, universal rack rear compatible, Salsa Post-Lock seat collar required, Salsa Wanderlust Rack recommended. |
| Water Bottle Mounts | Frames up to 54cm: 2 in main triangle, frames 56cm and larger: 3 in main triangle. |
| Downtube Accessory Mount | Yes, one pair |
| Toptube Mounts | Yes, compatible with Salsa Toptube bag |
| Stem Clamp | Ø28.6mm |
| Crown Race | Integrated SHIS 40, 36° angle |
| Front Brake (Rotor) | Flat Mount 160, Flat Mount Rear Standard, 35mm Thickness, 42mm Bolt Length |
| Front Spacing | 100mm |
| Front Thru-Axle | M12 x 100L, TP = 1.5, TL = 12mm |
| Three-Pack Mounts | One mount per fork leg |
| Rack Mounts | 165mm Lowrider compatible, Salsa Down Under rack recommended. |
- Тип тормоза Дисковый
- Тип Рамы
- Направление Гревел
- Комплектация Фреймсет
- Материал Карбон
- Возможность установки ремня Нет
- Дропауты Сквозная ось
- Тип рамы Хардтейл
- Размер колес 27,5/700С
- Модельный год 2018
